rebuild
5 posters
Page 1 of 1
rebuild
hi all, just stripped the barrels of the lc. who in sa does a good job boring cylinders and who is good to get pistons threw?
Mr500- Posts : 3
Join date : 2009-01-01
boring lc barrels and pistons
hi mr500, could suggest that you might like to try dean from hpf he has done work on my top ends and knows his 2 strokers . he will measure yours up and order in the correct oversize pistons to suit his number is 83494606 and he is located in scania ct gepps cross at the end of the street in like a trades shed, regards herfty #125
herfty- Posts : 4
Join date : 2009-02-02
Re: rebuild
I use a bloke called Dave Cahill at Richmond for all my crank and top end wirk. Top bloke and quick work.
8443 9787
8443 9787
4L-OWE- Posts : 27
Join date : 2008-05-30
Re: rebuild
Like many here, I got my work done by Ian WilliamsL
http://www.iwt.com.au/
Ian can get pistons for you, as can Richard Carter down at GC's.
I ordered my pistons from here:
http://homepage.ntlworld.com/ultimatelccrazy/
http://www.iwt.com.au/
Ian can get pistons for you, as can Richard Carter down at GC's.
I ordered my pistons from here:
http://homepage.ntlworld.com/ultimatelccrazy/
Jason- Posts : 101
Join date : 2008-05-20
Re: rebuild
gday . where about is this4L-OWE wrote:I use a bloke called Dave Cahill at Richmond for all my crank and top end wirk. Top bloke and quick work.
8443 9787
fredie- Posts : 1
Join date : 2009-06-15
Re: rebuild
he has a private house, call him for the address, as I just go there, I don't know the name of the street. its just west of the CBD
4L-OWE- Posts : 27
Join date : 2008-05-30
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|