Tech Tip
3 posters
Page 1 of 1
Tech Tip
It pays to spray some CRC inside the top of your for tube from time to time to stop the cap from rusting in. I've had a few lately that have been hard to get out, a pair that I did to day took over an hour to get out. A bit of provention will make it easier get caps off when you need too.
Pete.
Pete.
HR- Posts : 2
Join date : 2008-05-28
Re: Tech Tip
Brett was having all sorts of dramas getting one out the other day when I popped in to see him. Seems like timely advice.
Jason- Posts : 101
Join date : 2008-05-20
Re: Tech Tip
I had to drill and tap in to the caps that I did yesterday and used a slide hammer. One came out easy, the other we still had to heat before it finally came out.
HR- Posts : 2
Join date : 2008-05-28
Re: Tech Tip
Good tip. I had to pull apart an old set the other day and the caps were pretty stuck.
I sprayed them with WD40 then banged the forks upside down onto a bit of carpet, using the spring pressure to push them out.
Doesn't really old fork oil stink!
Lech
I sprayed them with WD40 then banged the forks upside down onto a bit of carpet, using the spring pressure to push them out.
Doesn't really old fork oil stink!
Lech
Bud977- Posts : 4
Join date : 2008-12-05
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|